Chapter 4 Memory Pattern Management
BECS-D19 User’s Manual
45
4.9 Edit Combined Pattern
The combined pattern means a combined group of certain memory patterns (less than 99)
after user sets their parameters. The combined pattern is set as automatic continuous
embroidery. In the memory pattern management interface, the icon of the combined pattern is
displayed as
. To embroider a combined pattern, user needs return to the memory
pattern management interface after creating or editing the combined pattern. If it’s already in
the embroidery preparation status, user should select the pattern and the system will
automatically return to the main interface. Then after embroidery confirmation, user can pull
the bar for embroidery. User can also compile the combined pattern into normal pattern by
using the edit function, so as to check and embroider the pattern.
1. Press
in the main interface, to enter memory pattern management interface.
2. To edit the saved combined pattern, user need select that combined pattern first. To
create a combined pattern, user need carry out the following operations.
3. Press “
” to enter operation interface for editing combined pattern.
The serial number indicates how many patterns to form the combined pattern and the
number of currently operated pattern.
4. Set the parameters of the first pattern, including pattern number, scaling ratio, rotating
angle, pattern direction and priority mode as well as color-changing order.
5. Press
to set many patterns to be combined, and press
to return to the
parameter setting of each pattern to be combined.
If the current pattern is not the first pattern in the combined pattern, user should set the
interval between it and the first pattern.
