Chapter 4 Memory Pattern Management
48
BECS-D19 User’s Manual
pattern name and X (Y) interval, and then press “
” to confirm.
4. Press “
” to integrate the patterns or press “
” to quit the operation, and
system will return to the pattern operation selection interface.
4.12 Generate High-speed Pattern
The function can cut the long stitch form into short ones, which keeps embroidery in
consistent high speed.
1. Press
in the main interface, to enter memory pattern management interface.
2. Select the target pattern in the pattern image area of the memory pattern management
interface.
3. Press “
” to enter the operation interface for generating high-speed pattern.
4. If user doesn’t use the default value, press “
” and change the value by keyboard.
5. Press “
” to generate high-speed pattern or press “
” to cancel the operation,
system will return to the pattern operation selection interface.
4.13 Compile Combined Pattern
This operation is used to generate a normal pattern from a combined pattern.
1. Press
in the main interface, to enter memory pattern management interface.
2. Select a saved combined pattern.
