Chapter 4 Memory Pattern Management
BECS-D19 User’s Manual
51
4. Press
to switch between satin stitch and jump stitch. Press the manual
frame-moving key to move the frame along the desired route, and press
at every
turning point to confirm the route.
5. Press
and “
” in order after editing, and system will hint user to input new
pattern number and name.
6. Following the hints, user can input new pattern number (system will automatically
provides a default number) and pattern name, and then press “
” to confirm for generation.
7. Press “
” to quit the operation and return to previous interface.
4.16 Generate Outline Pattern from Normal Pattern
This function is to create a new pattern according to the outline of the selected pattern.
1. Press
in the main interface, to enter memory pattern management interface.
2. Select pattern in the pattern image area of the memory pattern management interface.
3. Press “
” to enter the operation interface for generating outline pattern.
4. If user doesn’t want to use the default value, press “
” to change by keyboard.
5. Press “
” to generate the outline pattern or press “
” to quit the operation, and
