Chapter 4 Memory Pattern Management
52
BECS-D19 User’s Manual
then return to the pattern management selection interface.
4.17 Copy Pattern of Varied Stitch Length
This function is used to create pattern with the same shape but different stitch length.
1. Press
in the main interface, to enter memory pattern management interface.
2. Select pattern in the pattern image area of the memory pattern management interface.
3. Press “
” to enter the operation interface for copying pattern of varied stitch length.
If user doesn’t want to use the default value, press “
” to change by keyboard.
4. Press “
” to generate a new pattern with different stitch length or press “
” to
quit the operation, system will return to the pattern operation selection interface.
4.18 Set Common Parameters
Each pattern is attached with its color-changing order and normal parameters such as
scaling, repetition and so on, which can be checked and set here.
1. Press
in the main interface, to enter memory pattern management interface.
2. Select pattern in the pattern image area of the memory pattern management interface.
3. Press “
” to display the embroidery parameter setting interface, if the selected
pattern is the pattern under embroidery. See chapter 5 for details.
