Chapter 5 Machine Parameter Management
58
BECS-D19 User’s Manual
“machine authority management” interface. (See 5.3)
Refer to Appendix 1 for details of each parameter.
1. Press
in the main interface.
2. System enters the parameter setting interface, where user move cursor to the target
parameter and press “
” to select and set the parameter
.
Note:
1. The number, name and current value of each parameter are displayed in the parameter
list window.
2. For the machine with attached passwords, parameters marked with
can’t be
changed unless the administrator password is unlocked; parameters marked with
can’t be
changed unless the factory password is unlocked. When a parameter is labeled by a number,
then it can be changed by pressing “
”.
5.2.1 Setting Procedure for Other Parameters
The setting procedure is similar for all parameters. User can set them according to the
description in this section.
1. Select the parameter group.
Move the cursor to the parameter group to be changed, press “
” to enter the
parameter setting interface. Move the cursor to the parameter and press “
” to change.
Make sure the parameter is unlocked if the machine has encryption function (See Chapter 5.3)
For instance, if you want to modify machine stitch count parameter, which is located in
the first item “D01 Needles <1, 15>” of “machine configuration & maintenance parameter”.
2. Press
in the main interface, move the cursor to “machine configuration &
