Chapter 5 Machine Parameter Management
BECS-D19 User’s Manual
63
2. Move the cursor to “unlock/change password by administrator”, and press “
” to
input the old password and a new one.
The administrator needs to input the old password and new password one by one. The
machine manufacturer will inform the administrator of the default password which is of 4-9
digits. To prevent the user’s wrong operation, the new password must be input two times.
5.4.2 Administrator Unlocks the Machine
After machine administrator motifies the password, the machine is locked. General user
can’t modify the machine application parameters. To modify these parameters, the
administrator must input the administrator password or the manufacturer password. The
machine will be locked after power-on at each time.
1. Press
in the main interface to enter machine parameter management interface,
move the cursor to “machine parameter authorization management”, and press “
” to enter.
2. Move the cursor to “unlock/change password by administrator”, and press “
”.
