Chapter 12 Instructions on Loop Embroidery
BECS-D19 User’s Manual
125
Chapter 12 Instructions on Loop Embroidery
12.1 Function Introduction
Looping embroidery function: looping embroidery is a new kind of embroidery and
ites stitch form consists of independent thread loops, producing 3D and beautiful
effect.
Chained embroidery function: chained embroidery is to closely interlock thread loops
to form chained stitch form.
Thread breakage detection, auto patch and head lock functions.
Flat embroidery head and loop embroidery head auto/manual switch.
Looping embroidery and chained embroidery auto switch.
Needle of loop embroidery head automatic action.
Automatic thread trimming function.
Needle automatically goes up before manual frame-moving, and needle goes down
before embroidery.
Automatic switch among shuttles to realize color-changing.
Manual function of mechanical parts.
12.2 Switch between Loop Embroidery Head and Flat Embroidery
Head
12.2.1 Head Switch
As required by the embroidery work, user can switch between loop embroidery head
and flat embroidery head freely, and then make various operations.
Operation Procedure:
（
1
）
When machine stops, press
(current head is loop embroidery head) or
(current head is flat embroidery head) in the main interface, to enter the
following interface for manual head switch and color-changing:
