Chapter 3 Disk Management
28
BECS-D19 User’s Manual
4. Press
to select all
The key is effective only in the multi-selection mode, where pressing this key will have all
the objects within the directory selected.
3.4 Pattern Input
To input pattern data from disk to the machine’s memory, the user has to select files from
one or more disks first, and then input the pattern number and name for the file to be saved.
1. Select one or more files in the disk;
2. Press
and the system will require user to input the pattern number and name in
the memory;
3. Input the pattern number and name in the memory.
The system provides the minimum available pattern number as the default value, when
user enters the interface for inputting the pattern number and name in the memory. User can
