8.Features
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 62
Acquisition stop during reading out
Complete stop
Reading out
Stop command
Stop time
Exposure
Incomplete frame
Figure 8-12 Acquisition stop during reading out
As shown in Figure 8-12, when the camera receives an acquisition stop command during reading out, it
stops transferring frame data immediately. The currently transferred frame data is regarded as incomplete
frame and will be discarded.
Acquisition stop during blanking
Complete stop
Reading out
Stop command
Stop time
Exposure
Ignored
Figure 8-13 Acquisition stop during blanking
After the camera transferred a whole frame, the camera goes into wait state. When user sends an
AcquisitionStop command in wait state, the camera will return to stop acquisition state. The camera will
not send any frames even if it is just going to start the next exposing.
8.2.2.
Acquisition Mode
Two camera acquisition modes are available: single frame acquisition mode and continuous acquisition
mode.
Single frame acquisition mode: In single frame acquisition mode, the camera will only acquire one
frame of image at a time
