9.Software Tools
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 171
Status and operations
Status: Available, Read Only, Occupy, Unreachable, Unknown.
Operations: Auto Configure IP, Modify IP Address, Release Occupation, Reset Device.
Icon Status
Description
Operation
Available
When the camera is not opened in Exclusive or Control
mode by other processes. And the camera IP can be
modified manually
1)
Modify IP Address
2)
Reset Device
Read Only
When the camera is opened in Control mode by other
processes. By this time, the Auto Configure IP and
Modify IP Address will be forbidden
1)
Release Occupation
2)
Reset Device
Occupy
When the camera is opened in Exclusive mode by other
processes. By this time, the Auto Configure IP and
Modify IP Address will be forbidden
1)
Release Occupation
2)
Reset Device
Unreachable
Three conditions when in Unreachable status:
1)
The current camera IP is same as other camera IP
2)
The current camera IP is same as network card IP
3)
The current camera IP and the connected network
card are not in the same subnet
1)
Modify IP Address
2)
Auto Configure IP
Unknown
Cannot get the current accessible state for some reason 1)
Modify IP Address
Table 9-1 Device status description
Valid IP: Non LLA address, non 0.0.0.0.
Auto Configure IP
By this function, all unreachable camera’s IP will be changed to the effective IP, which has the same
network segment as the PC network port.
Figure 9-3
If the host network card IP is invalid, then after Auto Configure IP operation, it will be valid.