SECTION 4
NORMAL PROCEDURES
EASA Approved
TBM
700
PILOT’S OPERATING HANDBOOK
Page 4.3.21
Edition 1 -- November 30, 2010
Rev. 0
CHECK--LIST PROCEDURES
STARTING ENGINE USING
EXTERNAL POWER (GPU) (3/5)
CAUTION
IF 10 SECONDS AFTER HAVING POSITIONED CONDITION LEVER
TO ”LO / IDLE” THERE IS NO IGNITION OR IF DURING IGNITION
SEQUENCE, OVERTEMPERATURE INDICATION APPEARS
(MAX. ITT : 870
°
C FOR MORE THAN 20 SECONDS -- 1000
°
C FOR
MORE THAN 5 SECONDS),
INTERRUPT STARTING PROCEDURE :
Condition lever
CUT OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
”IGNITION” switch
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wait ITT < 800
°
C, then :
”STARTER” switch
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE ANY RESTARTING ATTEMPT, CARRY OUT A MOTORING
(Refer to paragraph ”MOTORING”)
CONTINUE WITH NORMAL PROCEDURE HEREAFTER
CAUTION
IF ENGINE IS SLOW TO START OR STAGNATES.
INTERRUPT STARTING PROCEDURE :
Condition lever
CUT OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
”IGNITION” switch
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
”STARTER” switch
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WAIT FOR 1 MINUTE (Refer to Chapter 2.4 ”STARTER OPERATION
LIMITS”), THEN TRY TO RESTART