SECTION 7
DESCRIPTION
TBM
700
PILOT’S OPERATING HANDBOOK
Page 7.13.3
Edition 1 -- November 30, 2010
Rev. 0
HEATING OF PITOTS AND STALL WARNING SENSOR (”PITOT 1 HTR”
AND ”PITOT 2 & STALL HTR”)
The two pitots, which supply ADC(s), the airspeed indicator and the stall
warning sensor are electrically heated. This deice equipment must be used
even during flight into non--icing conditions.
The system condition messages (”PITOT NO HT 1” or ...2”, ”PITOT HT ON 1”
or ...2”, ”STALL HEAT ON” or ”STALL NO HEAT”) are displayed on the GDU
1500 MFD CAS window. Refer to the “GARMIN” G1000 Cockpit Reference
Guide for further details.
TURBINE AIR INLET PROTECTION
Operation and description are set forth in Paragraph ”ENGINE AIR INLET”
Chapter 7.6.