SUPPLEMENT 37
”EROS/INTERTECHNIQUE”
GASEOUS OXYGEN
SYSTEM
(31000 FT)
TBM
700
Page 9.37.19
Edition 1 -- November 30, 2010
Rev. 0
Coil oxygen tubing inside facepiece over reservoir bag.
Connect oxygen tubing to manifold oxygen fitting.
WARNING
MAKE SURE LANYARD PIN IS INSERTED INTO CORRECT CHECK
VALVE FOR MASK BEING INSTALLED. CROSS CONNECTED PINS
WILL RESULT IN PASSENGERS PULLING LANYARD CORDS ONLY
TO INITIATE OXYGEN FLOW TO ANOTHER MASK
Insert lanyard pin into corresponding check valve.
Place mask facepiece -- first in deployment container. Make sure that oxygen
tubing and lanyard cord are free to deploy and are not caught between the
container and lid.
Close and latch deployment container lid.