XPDR1 ADS-B FAIL
or
XPDR2 ADS-B FAIL
1 / 1
Indicates that ADS-B OUT function of transponder 1 [or transponder 2] is
inoperative.
Other functions may remain available.
► Fly the airplane ◄
If transponder 2 [or transponder 1] is available:
1
- Restore ADS-B OUT function by setting transponder 2 [or transponder
1] as active.
2
- Continue the flight.
Inform maintenance department.
End of procedure ■
If transponder 2 [or transponder 1] is unavailable:
3
- Inform Air Traffic Control.
4
- Leave ADS-B OUT airspace.
5
- Continue the flight.
Inform maintenance department.
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 00
Page 3A.12.18
PIM - DO NOT USE FOR FLIGHT OPERATIONS