ACFT CONF MISM
is displayed in the CAS window if HomeSafe is deactivated
after it has begun to set up the airplane in the landing configuration. In this case,
the pilot must set the positions of the FLAPS and LANDING GEAR levers to agree
with the actual positions of the flaps and landing gear in order to retake control of
them.
As the initial flight plan in the FMS has been lost, the pilot will need to create a
new one.
Protection - Safety
HS CONFIG MODE
is displayed in the CAS window when HomeSafe is in
configuration mode.
The HomeSafe function is protected by the HOMESAFE breaker.
Optional Equipment
For optional equipment such as the stormscope, SVS or TAWS, refer to Section 9:
Supplements.
Such other optional equipment – as the radio altimeter, the Chartview system or
the TAS – are described in the Garmin Pilot's Guide.
NOTE
Refer to
Paragraph Chartview System Operating Limitations in Subsection 2.6.
for operating limitations of the Chartview system.
Section 7
Description
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 01
Page 7.15.17
PIM - DO NOT USE FOR FLIGHT OPERATIONS
