or
-
a fixed amber indicator/pushbutton
Both indicators/pushbuttons are located on the upper part of the left side of the
instrument panel. When either one lights up, press it once to reactivate. It will go
out and is ready to signal in the case of another failure. In the CAS window, the
corresponding failure message remains ON as long as the failure condition is true.
The actions associated to
RED
warning and
AMBER
caution messages are
described in this section of the POH for major failure and emergency situations.
NOTE
For minor failure and/or abnormal situations, refer to
The information associated to the
WHITE
advisory messages are described in the
Garmin Pilot's Guide.
Procedure Format
PROCEDURE TITLES
Name of the procedure 1/X
Procedure introduction or description of symptoms associated with the failure are
presented like this at the beginning of the procedure.
1/X is written if the procedure extends over two pages or more.
MEMORY ITEMS
The memory items are indicated in bold font as shown hereafter:
1 - The memory items are written like this.
Through self-training, simulator, initial and recurrent training, the pilot must
perfectly know these items in order to take appropriate actions without using any
Check-List as soon as the emergency situation occurs and is identified
Pilot's Information Manual
Section 3
Emergency Procedures
PIM TBM 960 - Edition 0
Rev. 00
Page 3.1.2
PIM - DO NOT USE FOR FLIGHT OPERATIONS
