6
1.
UK/US
Instructions
IMPORTANT!
Read the operating and safety instructions
BEFORE placing the document shredder
into operation.
You must follow the instructions.
Keep the operating instructions in a safe
place ready for later use.
Table of Contents
1.
Important information . . . . . . . . . . . . . . 6
1.4
Scope of supply . . . . . . . . . . . . . . . . . 60
1.5
Technical specifications . . . . . . . . . . . . 60
2.
Operation . . . . . . . . . . . . . . . . . . . . . 61
2.5
Paper shredding . . . . . . . . . . . . . . . . 62
2.12
CD, DVD & card shredding . . . . . . . . . . . 64
3.
Maintenance . . . . . . . . . . . . . . . . . . . . 65
3.1
Emptying shredding waste. . . . . . . . . . . 65
3.4
Possible malfunctions . . . . . . . . . . . . . . 66
3.4/3.7 Overload . . . . . . . . . . . . . . . . . . . . 66/67
3.6/3.9 Overheated . . . . . . . . . . . . . . . . . . 66/67
3.15
Cleaning the shredder . . . . . . . . . . . . . . 69
1.1 Intended use, warranty
The document shredder is designed for shredding
paper.
Wear, damage due to improper use or unauthorised
modifications and repairs are not covered by the war-
ranty or the guarantee.
This document shredder is not suitable for industrial
use.
1.2 Safety instructions
- Do not place the device near a source of heat.
- Store, transport and operate the device in an
upright position only.
- Only use liquids and gases on the device that com-
ply with DAHLE guidelines.
- Do not open up the device.
- Only operate the device in closed spaces, at tem-
peratures between 10°C and 25°C and at a non-
condensing humidity between15% and 95%.
- Ensure that the building installation has short-
circuit protection (max. 16 A).
- Do not operate the document shredder without
inserting documents.
- Use paper trays one at a time only.
Dispose of the document shredder
properly in an environmentally friendly
way at an authorised collection point. Do
not dispose of any parts of the document
shredder or packaging in domestic waste.
1.3 Key to pictograms
Important information
User information/safety instructions
WARNING
Place the device in a stable position on
the floor, leaving a gap of 100 mm to
the wall, ensure no heat can accumulate,
engage brake mechanisms (depending on
type)
Do not use near caustic substances.
Do not use near inflammable liquids or
gases.
Automatic start-up
ProSource Packaging, Inc. - 14911 Stuebner Airline Rd. Ste. A - Houston, TX 77069 - Phone: (281) 453-8801 - www.machine-solution.com
