background image

13

Transporting Your Bike

Carrying

Rolling

Bag

Travel Case

A

B

C

D

All 16 and 20-inch wheeled folding bicycles 
can be transported by the methods in Sections 
A, B, C, and D. Bikes with 24  and 26-inch 
wheels, as well as road bikes with 700c 
wheels, have limited carrying abilities and 
will not fit in overhead compartments or 
specific places. Using the methods described 
in Sections C and D are no problem. Our 
suggestion when commuting (medium distance 
travel) is to carry a nylon bag. For long 
distance travellers, the 24 to 26-inch wheeled 
bikes and the 700c road bicycles should be 
packed in a sturdy travel case.       

For short and medium distances, carrying 
a 16 to 20-inch wheeled folded bicycle is 
trouble-free. When using Jetstream full 
suspension bicycles, make sure you have 
the black nylon bag to bind the wheels 
together (sold separately). 
You can easily grab the bicycle and carry 
the bag by the saddle’s edge. When crossing 
a threshold, boarding a bus, train or plane or 
even simply stowing the bike in an overhead 
compartment, feel confident in knowing that 
your bike is ready!   

For a clean, efficient method of packing and 
carrying many Dahon bicycles, place the 
folded, collapsed or packed-away bicycle in 
a carry bag. There are spacious internal 
pockets for parts that must be removed, such 
as pedals, or tools you might need later. 
Having a nice, neat package is easy when 
the sides of the bag are pulled up tight and 
the handle/shoulder strap is fastened. The 
entire process will only take a few seconds. 
It is perfect to carry your bike on any public 
conveyance or in a car (the carry bag is not 
approved for airline check in).        

An easy or more efficient method to
transport your 16 to 20-inch wheeled 
bicycles is to roll them on their wheels. 
Remember that the Jetstream fork and 
frame must be bound together, thus 
making the wheels roll. By folding the 
bike towards you, tilt or angle the bike 
seat post approximately 305mm (12 inches), 
then push the bicycle forward. This method 
is perfect for travel: from parking lots to 
smooth granite or tile floors. 

A semi-hard travel case is a perfect long 
distance transportation solution for most 
folding bicycles.They have been proven 
to work well on any public transportation 
system. Many travel cases are able to 
withstand the most difficult safety challenges 
in travelling-airport check-in. You can find 
travel cases large enough for most 16, 20, 
and 24-inch wheeled bicycles. However, 
when transporting bikes that have 26-inch 
wheels, the wheels must be removed.   

Summary of Contents for Bike





















Reviews: