Dahua 8-Port ePoE
Switch User’s Manual
- 4 -
The power indicator light can display the current operation status of PoE power supply, which includes
three statuses: single port device power on, single port device power off and total device consumption
overload. Please refer to Table 2-2 for more details.
SN
Operation Status
Display Mode
1
Single port device power on
Slow flash twice
2
Single port device power off Quick flash once, slow flash once
3
Total device consumption
overload
Quick flash twice
Table 2-2
Port indicator light is to display the status of current transmission mode for the port, which includes IEEE
mode, E100 and E10. Please refer to Table 2-3 for more details.
SN
Working mode
Indicator light display
1
IEEE mode
Normally on
2
E100
On for 3 seconds, off for 1 second
3
E10
On for 1 second, off for 1 second
Table 2-3
2.2 Rear Panel
The device power port is shown in
Figure 2-2; it supports dual power input.
Figure 2-2
SN
Parameter
Note
1
PWR1
Support DC 48~57V
2
PWR2
Support DC 48~57V
3
Ground wire
2.3 PoE Power Supply
Six 100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply.
Two 100M RJ45 port supports IEEE802.3af, IEEE802.3at standard and Hi-PoE 60W power supply.
Total power consumption of PoE device is not allowed to exceed the reserve value of device PoE
power consumption.
