using template to add. Here we introduce search and then add function.
Search and then add: Search to find the remote device and then add. This function is useful if you do
not know the remote device IP address.
Add by IP address: Add remote device by IP address. This function is useful if you know the remote
device IP address, user name and password.
Batch add: Add several remote cameras by the same time. Please make sure these remote devices
are in the same IP segment such as (192.168.1.1
～
192.168.1.255), and the user name and
password are the same. It can greatly enhance add efficiency.
Import by template: Add remote device by import template.
Steps:
Step 1
Step 2
On the surveillance interface, from Setup->Camera->Remote->Device.
Enter Device interface. See Figure 2-13.
Figure 2-13
Register camera.
There are four ways: search and then add, input IP address and then add, batch add and use
template to add.
Search and then add
1.
Click the
on the right side of the Auto search.
Enter auto search interface. See Figure 2-14.
19
