Dahua Technology IVSS User Manual Download

Page: 262 / 688

User's Manual

242

To ensure device security, you need to enter the correct login password to operate on the

ACCOUNT

page (for example, add or delete a user).

8.6.1 Adding User Groups

The

admin

and

Onvif

groups are 2 default user groups. You can create more user groups to manage

users with different levels of permissions.

Procedure

Step 1

Step 2

Click on the upper-right corner and then click

Account

You can also click

Account

from the configuration list on the home page.

Step 3

Select the root node at the upper-left corner and then click at the lower-left corner.

Step 4

Enter the login password of the current account, and then click

Figure 8-77 User group property

Step 5

Configure the parameters.

Table 8-29 User group attribute parameters

Parameter

Description

Name

Customize a user group name.
The name ranges from 1 to 64 characters. It can contain English

letters, numbers and special characters ("_", "@", ".").

Parent Node

Displays the organization node that the user group belongs to. The

system automatically recognizes the parent node.

Description

Enter descriptions for the user group.

User List

Displays users in the group.

Step 6

Select user permissions.
1) Click the

Permission

tab.

Summary of Contents for IVSS

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IVSS

Reviews:

Related manuals for IVSS

Brands by name

Popular brands

Dahua Technology IVSS, User Manual

Search results

Summary of Contents for IVSS

Reviews:

Related manuals for IVSS

Brands by name

Popular brands