Dahua Technology IVSS User Manual Download

Page: 390 / 688

User's Manual

●

Click Sync from AI-Dis., obtain global smart detection display rule of IVSS. See "8.4.2.4.2

Setting AI Display" for detailed information.

●

Click Apply to all windows to copy current configuration to other window(s).

Figure 6-5 Face

Step 2

Enable Show Tracking Boxby clicking

After it is enabled, when the system detects face or human, the window will display
corresponding rule box.

Step 3

Enable Features Panel, and select feature(s) you want to display.
1) Click

next to Features Panel, to enable the function. When the panel is enabled,

the snapshots of detected faces are displayed on the live view.

2) Click

to select Face Detection tab.

indicates that the panel is selected.

3) (Optional) Drag

to adjust features panel transparency. The higher the value, the

more transparent the features panel.

4) (Optional) Select the features you need to display.

●

System supports displaying 4 feature types.

●

System has checked four features by default. To select other features, cancel the

selected features, and then select the ones you need.

Step 4

Click OK to save the configuration.

6.2.3.2 Live View

Go to the LIVE page, enable view, and then view videos are displayed.

●

The view window displays currently detected face rule boxes.

●

Features panels are displayed on the right side in real time.

●

The features panel displays detection time, face snapshot and face features details.

Summary of Contents for IVSS

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IVSS

Reviews:

Related manuals for IVSS

Brands by name

Popular brands

Dahua Technology IVSS, User Manual

Search results

Summary of Contents for IVSS

Reviews:

Related manuals for IVSS

Brands by name

Popular brands