2. Read and agree to all
Terms.
3. Set up your
Password.
1. Select your
Region
and
Language.
3.2 Deployment using NVR-system
If you are using an NVR-system, the following instruction will show how to initialise it. Once
you have entered all of the basic information, there are several ways of initialising cameras.
Step 2:
Launch the NVR whilst it is initialising and enter the basic set up information, including
country, terms, time, password, unlock pattern and IP address.
Step 1:
Make sure the NVR is connected to the same Internet network as the camera.
Page 7
QUICK START GUIDE
| TiOC Solution
4. Draw the
Unlock Pattern.
6. Set up
Date & Time
5. Enter your
Device Name.
