Dahua Technology XVR4 Series User Manual Download

Page: 110 / 330

Local Configurations

Parameter

Description

Scene Mode

Configure the white balance to adjust the general hue of the image.

The default setting is

Auto

Auto: Automatically apply white balance to different colors to



make the image color display normally.

Sunny: Apply the threshold value to sunny environment.



Night: Apply the threshold value to night.



Customized: Manually adjust the Red Gain and Blue Gain values.



Day & Night

Configure the color and black&white mode of the image. This setting

is not affected by the configuration files. The default setting is

Auto

Color: The camera outputs color image only.



Auto: Depends on the camera, such as overall brightness and



whether there is an IR light, either color image or black&white

image is output.

B/W: The camera outputs Black and white image only.



By Time: The camera outputs image according to the configured



sunrise time and sunset time.

Table 5-23

Click

Apply

to complete the settings.

Step 3

5.5.2 Configuring Encode Settings

Select

Main Menu > CAMERA > ENCODE > Encode

Step 1

The

Encode

interface is displayed. See Figure 5-64.

Figure 5-64

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands