Dahua Technology XVR4 Series User Manual Download

Page: 276 / 330

Local Configurations

263

Figure 5-241

5.20.2 Configuring Security Settings

To ensure the network security and protect data, you can configure the access permission to

the Device from host IP (host IP means the PC or server that has an IP).



White list includes the host IP that are permitted to access the Device.



Back list includes the host IP that are not permitted to access the Device.



Updata time white list includes the host IP that are permitted to sync the Device time.

5.20.2.1 Configuring Access Right

Select

Main Menu > SYSTEM > SECURITY > Access Right

Step 1

The

Access Right

interface is displayed. See Figure 5-242.

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands