Dahua Technology XVR4 Series User Manual Download

Page: 90 / 330

Local Configurations

Figure 5-42

Adjust the position of channels if needed.

Step 3

In the channel list, for example, in the channel 9 list, you can select 10, and then the

channel 9 and channel 10 exchange positions.

Click

Apply

to complete the settings.

Step 4

The live view screen displays the same layout as configured in this section.

5.2.6.3 Configuring Zero-Channel Settings

You can view several video sources on one channel on the web end.

Select

Main Menu > DISPLAY > ZERO-CHANNEL

Step 1

The

ZERO-CHANNEL

interface is displayed. See Figure 5-43.

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands