Dahua 5.8GHz Wireless AP/CPE User Manual
- 37 -
Figure 29
1. Network setting page -> network mode are both set as route mode, firewall is forbidden. Users can
set WAN mode as DHCP or static IP according to the fact whether there is DHCP server on the main
network, meanwhile, LAN IP users can modify the IP according to their demand, but they are
recommended not to modify IP too often, just in case the IP is forgotten and it will bring a lot of
trouble to your own life. When there is no DHCP in the external network to which PFM88X is
connected, then the users need to set relevant parameters manually. At this moment, WAN IP is set
differently with the IP of other hosts from external network to which PFM88X is connected, other
parameters can be set the same as the host which connects to the main network. For example: WAN
subnet mask, main DNS, auxiliary DNS, gateway can be set the same as other hosts which connect
to external network, the way of setting LAN IP and LAN subnet mask should be the same as the way
of setting DHCP.
Attention:
LAN IP can
’t be set as the same segment with WAN IP
2. Wireless setting page->set wireless mode as access point, network name can be any name, users
can set output power according to the distance between the devices, it is recommended to set the
max if it is in outdoor environment. Users can set the frequency of AP according to the surrounding
wireless environment setting, generally it can be set 5785MHz, wireless encryption is set not to be
encrypted;
3. Enable DHCPD on the tool application page, please refer to the setting method of DHCPD in chapter
