13
9. Insert the quick installation screw into the port, then move the dome towards the wall to seat the
dome in the wall mount.
10. Tighten the M6 Inner Hex Screw on the wall mount to secure the dome to the 64FB Wall Mount
assembly.
11. Attach one end of the safety hook to the anchor on the top of the dome.
12. Attach the other end of the safety hook to the anchor point on the 64FB Wall Mount.
Caution:
Make sure to attach the safety hook and ensure that it is securely fastened to the dome
and to the wall mount to improve the safety and reliability of the installation.
13. Make the proper wiring connections and supply power to the camera. Refer to Section 3.2 -
Wiring.
Note:
The video connection is covered by a heat-shrink tube. Once the video connection
is made, gently heat the tube to seal the connection and make it waterproof.
Safety Hook Anchor
