User’s Manual
76
Keypad Command Table
Appendix Table 1-1
Keypad command
Type
Operation
Global mode
Disarm the subsystem
Enter pa * + 2 + * + subsystem number.
Away arm the subsystem
Enter pa * + 3 + * + subsystem number.
Forced arm the subsystem
Enter pa * + 4 + * + subsystem number.
Home arm the subsystem
Enter pa * + 5 + * + subsystem number.
Forced home arm the subsystem
Enter pa * + 6 + * + subsystem number.
Switch system status
Enter passcode.
Arm a single zone:
Enter pa * + 10 + *
＋
zone number.
Disarm a single zone
Enter pa * + 11 + *
＋
zone number.
Cancel alarm
Cancel all: Enter pa * + 1.
Cancel zone alarm: Enter pa * + 1
+ * + subsystem number.
Cancel subsystem: Enter pa * + 23
+ * + zone number.
Bypass and isolate
Unbypass: Enter pa * + 7 + * +
zone number.
Bypass: Enter pa * + 8 + * + zone
number.
Isolate: Enter pa * + 9 + * + zone
number.
Relay
Manually turn on the relay output: Enter
pa * + 13 + * + relay number.
Manually turn off the relay output: Enter
pa * + 14 + * + relay number.
PSTN test
PSTN manual test: Enter pa * + 15.
SMS manual test: Enter pa * + 16 +
* + phone number.
Call manual test: Enter pa * + 17 +
* + phone number.
Restart the alarm controller
Enter pa * + 20.
Initialize the alarm controller
Enter user pa * + 21 + * + passcode you
configured.
Restore to the default settings
Enter pa * + 22.
Programming
mode
Enter programming mode.
Enter admin default passcode or installer default
passcode or manufacturer passcode or operator
pa * + 12.
Manage users
Add a user: Enter 000 + passcode.
Delete a user: Enter 001 + passcode.
Configure Permissions
