Web Interface
75
Parameter
Description
Password
Click
OK
to save.
Step 2
The VTO reboots, and then the login interface is displayed.
7.6.4 Port Config
Configure the port that is used to login the VTO Web interface.
Select
System Config > Network Config > Port Config
.
Step 1
The
Port Config
interface is displayed. See Figure 7-25.
Port Config
Figure 7-25
Web Port
Step 2
It is 80 by default, if it is occupied, you can use numbers from 1025 to 65535.
Click
OK
to save.
Step 3
If the port is changed, enter "http://VTO IP address: web port" in the address bar of the
Internet browser to login the Web interface of the corresponding VTO.
7.6.5 DDNS Config
Properly configure DDNS, and then you can always visit your VTO with a constant domain
name no matter how much your VTO IP address changes.
Before start, check whether your VTO supports the servers in
Server Type
, and then go to
the DDNS website and register the username, password, and domain name.
Finish register, then log in the DDNS website, and then you can view all the connected
devices in your account.
Select
System Config > Network Config > DDNS Config
.
Step 1
The
DDNS Config
interface is displayed. See Figure 7-26.
