10
Wiring for two card readers and two face recognition access controllers (mm[inch])
Table 4-2
Cable description
Type
Description
Ethernet cable
One Cat5 Ethernet cable for two card readers and one face recognition
access controller. Reserve 3 m of the cable outside the cable entry.
Two Cat5 Ethernet cable for two card readers and two face recognition
access controllers. Reserve 3 m of each cable outside the cable entry.
Power cable
One 220 V RVV3×2.5 power cable for each turnstile. Reserve 3 m of the cable
outside the cable entry.
4.2.3
Cable Layout
For recommended cable layout, see Figure 4-5. If you incorrectly lay cables like Figure 4-6, the turnstile
might not be firmly installed, and the cables might be broken when hammering the expansion bolts.
