21
6
Commissioning
Before commissioning, check if all the components are normal.
Check if all the cables are properly connected.
The turnstile will start working 3 seconds after being powered on. Also, it can only be powered
on 30 seconds after being powered off.
Check if the arms can be lifted up normally, and cannot be folded. If the arms cannot be lifted up,
you need to move the arm electromagnet to the appropriate position by adjust the screws on it.
Check if the arms can be folded away after the turnstile is powered off, and can be fixed
horizontally after the turnstile is powered on, by folding them to the maximum extent, and then
lifting them up again.
Swipe a card or verify a face, and then check if the arms can be unlocked and rotated normally.
After completing all the steps above, the arms of the turnstile can only be unlocked with valid
authorization.
