22
Power on the turnstile after completing above operations. Because the arm will automatically
fall when powered off, you need to push the arm down and then lift it to a level position to
restore the turnstile to it normal status when powered on.
Set the passing mode to In&Out Free, and people can manually turn the arm to pass from either
direction. The turnstile closes automatically after people pass.
Check whether the electromagnetic chuck works properly and the turnstile arms fall normally
when powered off.
After issuing card or granting face permissions, run the turnstile a few times. Check the
authorization and then check whether the arms can rotate in the authorized direction and
rotate smoothly.
Set the passing mode to the targeted mode after completing all these procedures.
Self-checking
6.3
You need to manually push the arms down and then lift them up to a level position every time
turnstile restarts for it to work normally.
