User’s Manual
1
1
Introduction
Overview
1.1
The Barrier can be used together with radar for access control, and it primarily consists of top
cover, casing, drive unit, control box, and barrier arm (either at the right side or at the left side).
Casing in aluminum alloy and sheet metal, and the surface is treated with spraying process of
ultra-fine silver powder, ensuring high corrosion-resistance performance for 10 years.
Three types of barriers are available: Straight arm barrier, folding arm barrier, and fence arm
barrier. See Table 1-1.
Table 1-1 Barrier type
Type
Description
Remark
Straight
arm
barrier
The arm can be either at the right side or at the left side. Radar is
required.
Barrier with 3 m (9.84 ft) straight arm enjoys opening/closing
time of 0.9 s or 1.4 s.
Barrier with 4 m (13.12 ft) straight arm enjoys
opening/closing time of 1.4 s.
Barrier with 5 m (16.40 ft) straight arm enjoys
opening/closing time of 2 s.
Barrier with 6 m (19.69 ft) straight arm enjoys
opening/closing time of 3 s.
Customization
is available to
meet your
specific needs.
Folding
arm
barrier
The arm can be either at the right side or at the left side. Radar is
required.
For barrier with 3 m (9.84 ft) arm, each of the two sections of
the arm is 1.5 m (4.92 ft), and it enjoys opening/closing
speed of 1.4 s.
For barrier with 4 m (13.12 ft) arm, each of the two sections
of the arm is 2 m (6.56 ft), and it enjoys opening/closing time
of 2 s.
Fence
arm
barrier
The arm can be either at the right side or at the left side. Radar is
required.
Barrier with 3 m (9.84 ft) fence arm enjoys opening/closing
time of 1.4 s or 2 s.
Barrier with 4 m (13.12 ft) fence arm enjoys opening/closing
time of 2 s.
