User’s Manual
14
Parameter
Description
XL(m)/XR(m)
Under the coordinate system of the Radar, the coordinates of the left/right lane line.
Negative value means the lane line is on the left side of the Radar and positive value
indicates the lane line is on the right.
Distance
Detection distance. Only when a vehicle passes the line, can the Radar detect it.
Recommended range: 20 m–55 m.
Velocity
The lower limit of the speed which the Radar can detect.
Direction
Select lane direction when the
Dir
is set to
Double
.
Group Configuration
When the lanes are distributed evenly with the same width, you can enable the
Group
function. You
can only enter the lane width and the first XL value. The software will calculate the rest.
Single Configuration
When the lane width is not the same, or during other special situations where you need to enter the
XL and XR value for each lane. Disable
Group
, and the
Width
value is invalid.
We recommend enabling Group function when lane width meets the requirements.
Vehicles within the monitoring range will trigger the Radar to report to the camera through
RS-485 when both Distance and Velocity are exceeded.
4.2.6
Exporting Log
You can view the log and analyze the vehicle trigger information.
Operation log
Figure 4-10
Select
Output
, and the software generates a .csv file containing vehicle triggering logs under
the default path displayed next to
Output
.
Clear
Output
, and vehicle triggering logs will not be saved to local.
Cancel selecting
Output
in advance. Otherwise you might not be able to view the logs in local
storage.
