User’s Manual
23
Triggering Capture by the Radar
7.2
You can configure the Radar to trigger capture of the camera, and measure speed at the same time.
Log in to the camera web client.
Step 1
Select
Setting > Event > ANPR Snap > Illegal Capture > Rule Config
.
Step 2
Rule configuration
Figure 7-3
Select
ANPR
from
Event
Type
, and set other parameters as needed.
Step 3
Click
, and then configure the corresponding advanced parameters of
ANPR
.
Step 4
Advanced parameters of ANPR event
Figure 7-4
Table 7-1
Advanced parameter description
Name
Description
Radar
The system takes a violation snapshot of vehicles when the Radar detects it.
Video Analyse
The system analyzes the real-time video to detect traffic violations. Once a
violation is detected, the system automatically captures pictures of the vehicle.
Copy to
Copy the current settings to the same-type rules or all the rules.
Select
Radar
from
Trigger
Source
and then click
Confirm
.
Step 5
