121
Figure 5-20
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel from the dropdown list.
Period
It divides one day (24 hours) to two periods. You can set
different hue, brightness, and contrast for different periods.
Hue
It is to adjust monitor video brightness and darkness level. The
default value is 50.
The bigger the value is, the large the contrast between the bright
and dark section is and vice versa.
Brightness
It is to adjust monitor window bright. The larger the number is,
the bright the video is. When you input the value here, the bright
section and the dark section of the video will be adjusted
accordingly.
Contrast
It is to adjust monitor window contrast. The larger the number is,
the higher the contrast is. You can use this function when the
whole video bright is OK but the contrast is not proper. Please
note the video may become hazy if the value is too low. If this
value is too high, the dark section may lack brightness while the
bright section may over exposure.
Saturation
It is to adjust monitor window saturation. The larger the number,
the strong the color is.
Gain
The gain is to set the gain value. The default value may vary due
to different device models. The smaller the value, the low the
noise. But the brightness is also too low in the dark
environments. It can enhance the video brightness if the value is
high. But the video noise may become too clear.
White level
It is to enhance video effect.
Color mode
It is to set color mode. Color modes include: standard, soft,
customized and etc.
5.6.1.2 Video and Audio
5.6.1.2.1 Encode
On the main interface, from Setup->Camera->Encode->Encode, the encode interface is shown as
