136
Parameter
Function
Please note system will not send out the email immediately
when the alarm occurs. When the alarm or the abnormity
event activates the email, system sends out the email
according to the interval you specified here. This function is
very useful when there are too many emails activated by the
abnormity events, which may result in heavy load for the email
server.
Health mail
enable
Please check the box here to enable this function.
Update period
(interval)
This function allows the system to send out the test email to
check the connection is OK or not.
Please check the box to enable this function and then set the
corresponding interval.
System can send out the email regularly as you set here.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save the
email setup information.
5.6.2.8 FTP
The FTP interface is to set FTP information.
From Setup->Network->FTP, enter FTP interface. See Figure 5-43.
Please set the FTP as your remote storage location. System can save record file or snapshot
picture to the FTP once the network is offline or malfunction.
Figure 5-43
5.6.2.9 P2P
You can use your cell phone to scan the QR code and add it to the cell phone client.
Via the SN from scanning the QR code, you can access the device in the WAN. Please refer to
the P2P operation manual included in the resources CD.
