148
Parameter
Function
Note
When alarm type is MD/alarm, please enable the corresponding
channel to snapshot. For example, when alarm type is MD, please
refer to chapter 5.6.3.1.1 Motion detect to enable motion detect
snapshot function, and refer to 5.6.1.2.2 Snapshot to set Event
snapshot function.
Holiday
Check the box here to enable holiday function.
Setup
(Sunday to
Saturday)
Click the Setup button, you can set record period. See Figure 5-56.
There are six periods in one day. If you do not check the date at the
bottom of the interface, current setup is for today only.
Please click Save button and then exit.
Setup
(Holiday)
Click the Setup button, you can set record period. See Figure 5-56.
There are six periods in one day. If you check Holiday box, current
channel shall record as your holiday setup here.
Copy
Copy function allows you to copy one channel setup to another. After
setting in channel, click Copy button, you can go to interface Figure
5-57. You can see current channel name is grey such as channel 1.
Now you can select the channel you want to paste such as channel 2.
If you want to save current setup of channel 1 to all channels, you can
click the first box “ALL”. Click the OK button to save current copy
setup. Click the OK button in the Encode interface, the copy function
succeeded.
5.6.4.2 Storage
Here you can see storage device information. You can also operate the read-only, write-only, hot
swap and format operation.
From Setup->Storage->HDD manage, enter HDD manage interface. See Figure 5-58.
Figure 5-58
5.6.4.3 Record control
