63
Figure 4-51
4.3.2.3 FTP
It is to backup record file or image to the FTP to storage or view.
Preparation
Before the operation, please download or purchase the FTP service tool and install on the PC.
Note
For the FTP user, please set FTP folder write right, otherwise system cannot upload the image.
Step 1 On the main menu, from Setting->Network,
Enter Network interface.
Step 2 Click Network service,
Enter network service interface.
Step 3 Configuring email.
1. Double click FTP,
Enter FTP interface. See Figure 4-52.
2. Set parameters.
Host IP: The host IP you have installed the FTP server.
Host port: The default setup is 21.
User name/Password: The account for you to access the FTP server.
Remote directory: The folder you created under the root path of the FTP according
to the corresponding rule.
If there is no remote directory, system can auto create different directories
according to the IP, time and channel.
If there is remote directory, system can create corresponding folder under the
FTP root path and then create different folders according to IP address, time and
channel.
File length: File length is upload file length. When setup is larger than the actual file
length, system will upload the whole file. When setup here is smaller than the actual
file length, system only uploads the set length and auto ignore the left section. When
interval value is 0, system uploads all corresponding files.
Image upload interval: It is the image upload interval. If the image upload interval is
larger than the image snapshot frequency, system just uploads the lasted image.
If the image interval is 5 seconds and the snapshot frequency is 2 seconds,
system will send out the latest image at the buffer at 5 seconds.
