Dahua iDVR&iHCVR User Manual Download

Page: 114 / 262

Dahua iDVR&iHCVR

User’s Manual

105



Title: Please input email subject here. System support English character and Arabic

number. Max 32-digit.



Receiver: Please input receiver email address here. System max supports 3 email

boxes. System automatically filters same addresses if you input one receiver

repeatedly.



SSL enable: System supports SSL encryption box.



Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no

interval.



Health email enable: Please check the box here to enable this function. This function

allows the system to send out the test email to check the connection is OK or not.



Interval: Please check the above box to enable this function and then set the

corresponding interval. System can send out the email regularly as you set here.

Click the Test button, you can see the corresponding dialogue box to see the email

connection is OK or not.

Please note system will not send out the email immediately when the alarm occurs. When

the alarm, motion detection or the abnormity event activates the email, system sends out

the email according to the interval you specified here. This function is very useful when

there are too many emails activated by the abnormity events, which may result in heavy

load for the email server.

Figure 4-77

4.10.2.9 FTP

You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish

FTP service.

Please install Ser-U FTP SERVER first. From

“start” -> “program” -> Serv-U FTP Server

-> Serv-U Administator. Now you can set user password and FTP folder. Please note you

Summary of Contents for iDVR&iHCVR







































































































































































































































































Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands

Dahua iDVR&iHCVR, User Manual

Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands