Dahua iDVR&iHCVR User Manual Download

Page: 237 / 262

Dahua iDVR&iHCVR

User’s Manual

228



DVR and monitor resistance is not compatible.



Video transmission is too long or degrading is too huge.



DVR color or brightness setup is not correct.

6. I can not search local records.

There are following possibilities:



HDD ribbon is damaged.



HDD is broken.



Upgraded program is not compatible.



The recorded file has been overwritten.



Record function has been disabled.

7. Video is distorted when searching local records.

There are following possibilities:



Video quality setup is too low.



Program read error, bit data is too small. There is mosaic in the full screen.

Please restart the DVR to solve this problem.



HDD data ribbon error.



HDD malfunction.



DVR hardware malfunctions.

8. There is no audio when monitor.

There are following possibilities:



It is not a power picker.



It is not a power acoustics.



Audio cable is damaged.



DVR hardware malfunctions.

9. There is audio when monitor but there is no audio when system playback.

There are following possibilities:



Setup is not correct. Please enable audio function



Corresponding channel has no video input. Playback is not continuous when the

screen is blue.

10. Time display is not correct.

There are following possibilities:



Setup is not correct



Battery contact is not correct or voltage is too low.



Crystal is broken.

11. DVR can not control PTZ.

There are following possibilities:



Front panel PTZ error

Summary of Contents for iDVR&iHCVR







































































































































































































































































Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands

Dahua iDVR&iHCVR, User Manual

Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands