Dahua iDVR&iHCVR User Manual Download

Page: 213 / 262

Dahua iDVR&iHCVR

User’s Manual

204

Figure 5-73

Please refer to the following sheet for detailed information.

Parameter Function

Channel

Here you can view channel number.
The number displayed here is the max channel amount of your
device.

Status

There are three statuses: schedule, manual and stop.

Schedule

System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).

Manual

It has the highest priority.
Enable  corresponding  channel  to  record  no  matter  what  period
applied in the record setup.

Stop

Stop current channel record no matter what period applied in the
record setup.

Start all/
stop all

Check the corresponding All button, you can enable or disable all
channels record.

5.9.5 System

5.9.5.1 General

The general interface includes general, date/time and holiday setup.

5.9.5.1.1 General

The general interface is shown as in Figure 5-74.

Summary of Contents for iDVR&iHCVR







































































































































































































































































Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands

Dahua iDVR&iHCVR, User Manual

Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands