Web Operations
215
5.4.3.2 Auto Deleting Old Files
After configuring auto deleting old files, when the Device is working, it deletes the old files that
occurred before the set schedule.
Select
SETUP > SYSTEM > MAINTAIN
.
Step 1
The
Auto Maintain
interface is displayed.
In the
Auto Delete Old Files
area, select
Customized
, and then enter the days.
Step 2
You can enter 1 day through 31 days.
Click
Save
.
Step 3
5.4.3.3 Auto Booting Up
After configuring auto booting, the Device boots up automatically according to the schedule. If
you turn the vehicle key to ACC position before configuring the auto booting up schedule, the
Device boots up immediately.
Select
SETUP > SYSTEM > MAINTAIN
.
Step 1
The
Auto Maintain
interface is displayed.
In the
Auto Boot up
area, select
Valid
, and then enter the specific time.
Step 2
Click
Save
.
Step 3
5.4.3.4 Auto Shutdown
After configuring auto shutdown, the Device automatically shuts down according to the ACC
power off time and auto boot up setting.
If you have set the time auto boot up, there are two situations when the ACC is powered off:
If the system time is between the auto boots up and auto shutdown, the Device is turned off
by the configured time. If the system time is before the auto booting up or after the auto
shutdown, the Device is turned off immediately.
If the auto booting up is not set, when the ACC is disconnected, the Device shuts down at
the scheduled time.
Select
SETUP > SYSTEM > MAINTAIN
.
Step 1
The
Auto Maintain
interface is displayed.
In the
Auto Shutdown System
area, select
Everyday
, and then enter the specific
Step 2
time.
Click
Save
.
Step 3
5.4.3.5 Auto Delay for Shutdown
After configuring auto delay for shutdown, when select
Never
for auto shutdown system and
ACC is disconnected, the Device shuts down according to the settings of auto delay for
shutdown.
If you enter the delay value except
0
, the Device automatically shuts down according to the
delay settings.
If you enter
0
, the Device shuts down according to the auto shutdown settings without
delay.
Select
SETUP > SYSTEM > MAINTAIN
.
Step 1
