Local Configurations
47
4.2.2.3.1 Configuring Presets
You can quickly move the PTZ camera to the configured presets after configuration.
On the PTZ control panel, click
Set
.
Step 1
The PTZ function settings interface is displayed.
Click the Preset tab.
Step 2
The
Preset
interface is displayed. See Figure 4-30.
Preset
Figure 4-30
Move the camera to the required position through direction buttons.
Step 3
In the Preset box, enter the preset value.
Step 4
Click
Set
to complete the settings.
Step 5
Click
Del Preset
to delete the preset.
To modify the preset, select the preset and move the camera to the direction that
you need.
4.2.2.3.2 Configuring Tours
The PTZ camera repeats performing tours among the configured presets after configuration.
On the PTZ control panel, click
Set
.
Step 1
The PTZ function settings interface is displayed.
Click the
Tour
tab.
Step 2
The
Tour
interface is displayed. See Figure 4-31.
The parameters might be different depending on the model you purchased.
Calling Tours
Figure 4-31
In the
Patrol No.
box, enter the value for the tour route.
Step 3
In the
Preset
box, enter the preset value. Click
Add Preset
to add a preset for this tour.
Step 4
You can repeat adding more presets.
