Web Operations
164
Parameter
Description
White Level
This function is supported only on Channel 1 or Channel 5.
When the image is dark, select the
White Level
check box, and in the
White Level
strength list, select the strength level. The image brightness
can be adjusted. The higher the level is, the brighter the image will become.
The bigger Hue is, the brighter the image will become.
Color mode
Select a color mode for the image that you want to view.
Click
Customized
to customize the color mode.
5.3.1.2 Configuring Encode Parameters
5.3.1.2.1 Configuring Encode Setting
You can configure the encode settings for main stream and sub stream.
Select
SETUP > CAMERA > ENCODE
> Encode
.
Step 1
The
Encode
interface is displayed, see Figure 5-48.
Encode setting parameters might be different depending on the model you purchased,
and the actual product shall prevail.
Encode settings
Figure 5-48
Select a channel.
Step 2
Configure the parameters. For details, see Table 5-19.
Step 3
Table 5-19 Encode setting parameters description
Parameter
Description
Code-Stream
Type
In the
Code-Stream Type
list, select
Regular
,
MD
(Motion Detect), or
Alarm
. The three types correspond to different parameters.
Compression Displays the video encode standard.
