Web Operations
187
Ap
Figure 5-72
Enter SSID information, select work band and verification type, and then enter the
Step 3
connection password.
In the
Work Band
list, you can select
2.4G
or
5G
.
Select the Connection Password check box, the clear text password is displayed.
The default password is 12345678.
Click
Save
.
Step 4
5.3.2.8 Configuring Auto Register Settings
After auto registration is succeeded, when the Device is connected into Internet, it will report
the current location to the specified server which acts as the transit to make it easier for the
Client software to access the Device.
Select
SETUP > NETWORK > REGISTER
.
Step 1
The
REGISTER
interface is displayed. See Figure 5-73.
Register
Figure 5-73
Select the Enable check box.(Selected by default)
Step 2
Configure the parameters. For details, see Table 5-28.
Step 3
Table 5-28 Register settings parameters description
Parameter
Description
Server IP
In the
Server IP
box, enter the IP address or domain name of server to
register.
Port
Enter the port of the server for register.
ID
Unique ID for identifying Device. When different Devices register to the
same server, the IDs should be different.
