93
Interval
This is the interval that the system sends another email for the same type of
alarm event, which means, the system does not send an email upon any same
alarm event within the set interval.
The interval ranges from 0 through 3600 seconds. 0 means that there is no
interval.
This setting helps avoid large amount of emails caused by frequent alarm
events.
Health Mail
Confirm whether the email link is valid through the test information sent
automatically from the system.
Select the
Health Mail
check box, and then enter the interval. The system can
send a test email to check the connection after the specified interval.
The value ranges from 30 minutes through 1440 minutes.
Email test
Click
Test
to test if emails can be sent out and received as intended. If the
configuration is correct, you would receive a test mail. Before testing, click
OK
.
Click
OK
.
5.6.5
Configuring Auto Register Settings
After successfully auto registered, when the device is connected into the Internet, it will report the
current location to the specified server to make it easier for the client software to access to the
device, and to view and monitor it.
Select SETTING > NETWORK > REGISTER.
The
REGISTER
interface is displayed.
Register
Select the
Enable
check box to enable the function. (Selected by default).
Configure parameters.
Table 5-19
Register parameters
