94
Parameter
Description
Server Address
Enter the IP address or domain name of the server to register.
Port
Enter the port of the server to register.
Sub device ID
Unique ID for identifying the device. When different devices register to the
same server, the sub device IDs should be different.
Click
OK
.
5.6.6
Configuring P2P Settings
P2P is a private network penetration technology. With this technology, you do not need to apply for
dynamic domain name, set port mapping, or deploy transit server. You can add devices for
management by either of the following two ways.
Scan the QR code on the interface to download the app, and register an account. See "App
Operation Examples" for details.
Log in to www.gotop2p.com and register an account, and then add devices by device serial
numbers. See
P2P Operation Manual
for details.
Before using P2P, make sure that the device is connected to the Internet.
Preparation
The device is connected to the Internet.
DMSS app is downloaded and installed on your mobile phone.
Procedure
Select SETTING > NETWORK > P2P.
The
P2P
interface is displayed.
P2P
Select
Enable
to enable P2P.
Use the app to scan the QR code of the device SN to add the device in the app.
