98
Procedure
Select SETTING > STORAGE > FTP.
The
FTP
interface is displayed.
FTP settings
Select
Enable
to enable FTP upload and select FTP type.
FTP is for plain text transmission and SFTP is for cipher text transmission. It is
recommended to select SFTP.
When
FTP
is selected, the system gives a risk prompt. Select
OK
or
Cancel
as needed.
Configure parameters.
表
1-2
FTP parameters
Parameter
Description
Server Address The IP address of the host PC that is installed with the FTP/SFTP server.
Port
By default, SFTP port is 22 and FTP port is 21.
User name
The user name and password used to access the server.
Password
Anonymous
Select
Anonymous
if you want to log in to the server anonymously.
Remote
directory
Create a folder on FTP server.
If you leave it empty, the system automatically creates folders based on IP,
time, and channel.
If you enter a name for the remote directory, the system creates a folder
with the entered name under the FTP/SFTP root directory first, and then
automatically creates folders based on IP, time, and channel.
File size
Enter the size of the uploaded video recordings.
If the entered length is less than the length of the video recording, only a
section of the video recording can be uploaded.
If the entered length is more than the length of the video recording, the
whole video recording can be uploaded.
If the entered length is 0, the whole video recording will be uploaded.
